Mapei Latexplan No Amonia Kit
Two-part, fast-setting, cement based levelling compound suitable for use over the most existing adhesive residues (including bitumen) and onto plywood substrates. Resilient floor coverings can be installed after 4 hours.
• Latexplan No Ammonia is suitable for levelling differences in thickness between 3mm to 10mm on new and existing substrates. It can be used over most existing adhesive residues, including bitumen.
• Suitable for use over plywood substrates and MAPEI surface applied DPMs in most cases without priming. Accepts subsequent floor coverings in 4 hours. In most cases, priming is not required.
• Suitable for use with underfloor heating.
• Moisture tolerant; can be applied below surface applied damp proof membranes.
Coverage: One unit (liquid + powder) will cover approximately 5m² at 3 mm thickness.
All product information has been obtained from the manufacturer. Always read and understand the product data and safety sheets before use.
Images are digital and therefore may vary slightly to the actual product.